« previous next »
Pages: [1]   Go Down

Author Topic: mask/breathing apparatice - warmup  (Read 4729 times)

Offline noslin

  • Sr. Member
  • ****
  • Posts: 259
    • View Profile
  • Your Best Time: 0.00
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: west coast
mask/breathing apparatice - warmup
« on: January 22, 2019, 09:44:41 PM »
what are you guys using if anything?  any good deals on full face breathing apprentice?
Logged

Offline janjon

  • Full Member
  • ***
  • Posts: 208
    • View Profile
  • Your Best Time: 5.74/124 1/8
  • Your Engine: SB Chev, gas, 350ish
  • Your Track: Houston Motorsports Park
  • Your Vehicle: '65-ish 150" SBC/Glide FED
Re: mask/breathing apparatice - warmup
« Reply #1 on: January 26, 2019, 05:32:03 AM »
Breathing apprentices are hard to find. Thinking apprentices even more so. Those that will show up to work are exceedingly rare these days. And those that are literate and can spell? Practically nonexistent. Evidently.
Logged
Just keep the same amount of stuff on the right
as there is on the left. Seeing straight ahead is highly overrated....

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: mask/breathing apparatice - warmup
« Reply #2 on: January 26, 2019, 06:28:10 AM »
Wouldn't a commonly available painter's mask apparatus with replaceable screw-on carbon canister cartridges work? Like the ones used when painting catalyzed paint?
Logged

Offline noslin

  • Sr. Member
  • ****
  • Posts: 259
    • View Profile
  • Your Best Time: 0.00
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: west coast
Re: mask/breathing apparatice - warmup
« Reply #3 on: January 26, 2019, 04:36:06 PM »
Quote from: janjon on January 26, 2019, 05:32:03 AM
Breathing apprentices are hard to find. Thinking apprentices even more so. Those that will show up to work are exceedingly rare these days. And those that are literate and can spell? Practically nonexistent. Evidently.

vary goode :P  did not catch that, dig the huemer :D

Quote
Wouldn't a commonly available painter's mask apparatus with replaceable screw-on carbon canister cartridges work? Like the ones used when painting catalyzed paint?

they would, just seeing if anyone had lesser expensive units they were using.  I looked on ebay and there are units on there for i guess a decent price. ill just pop for one and see how it works. 
Logged

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: mask/breathing apparatice - warmup
« Reply #4 on: January 26, 2019, 05:58:06 PM »
I don't like to cheap out" on safety gear. You have only one set of lungs, and - unlike spark plugs - you can't change them out. Also,the membranes in your eyeballs can also absorb toxic fumes - protect them too. Good luck.
Logged

Offline 225digger

  • Full Member
  • ***
  • Posts: 167
    • View Profile
  • Your Best Time: 7.43 185 mph in a RED
  • Your Track: numidia
Re: mask/breathing apparatice - warmup
« Reply #5 on: January 26, 2019, 06:16:35 PM »
3m makes a really nice full face mask, and get the organic vapor filters for it. yes its alittle pricey, but the mask should last years, and the filters should also.

https://www.amazon.com/3M-Facepiece-Reusable-Respirator-54159-x/dp/B007JZ1M10/ref=sr_1_1_sspa?ie=UTF8&qid=1548555242&sr=8-1-spons&keywords=3m+full+face+respirator&psc=1
Logged

Offline noslin

  • Sr. Member
  • ****
  • Posts: 259
    • View Profile
  • Your Best Time: 0.00
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: west coast
Re: mask/breathing apparatice - warmup
« Reply #6 on: January 27, 2019, 08:16:54 AM »
Quote from: 225digger on January 26, 2019, 06:16:35 PM
3m makes a really nice full face mask, and get the organic vapor filters for it. yes its alittle pricey, but the mask should last years, and the filters should also.

https://www.amazon.com/3M-Facepiece-Reusable-Respirator-54159-x/dp/B007JZ1M10/ref=sr_1_1_sspa?ie=UTF8&qid=1548555242&sr=8-1-spons&keywords=3m+full+face+respirator&psc=1

thank you, looks like it might work with glasses too after reading reviews. 
Logged
Pages: [1]   Go Up
« previous next »