storing the wheelie bar in the Trailer

[MikenMpls]

Quick question, how are you storing your wheelie bars during transport in your trailer?  Making mounts in my trailer for a 6ft wheelie bar is proving to be difficult. I am looking for something simple but secure and lightweight. Thanks for your photos and suggestions!

[wideopen231]

NO pics.We had a aluminum tube with tabs welded to match mount point son bar attached to wall and a cup fow wheel to sit in at bottom.Simple quick pins thru mounting holes and small bungi at bottom.Took 30 seconds to tie down or remove.Oh yea we had third bar bungi down to others,but it was built so pulling pin allowed it to collapse for storage. Hope thats stated clearly.

[THE FRENCHTOWN FLYER]

That's almost exactly how I do mine. Wheel down, bracket with push pins up top. The top bracket has a 4" link in the center to align with the middle tube that pivots at the wheel, with a third push pin.

Next to that I have a similar bracket to hold my fiberglass nose piece up out of the way - with Dzus buttons.

[glofria]

Wrap it in a blanket and lay it on the floor.

[JrFuel Hayden]

We stand the WB up , wheel down , and strap it to an upright in our trailor, simple, no issues

[gregm784]

I'm setting up a "new to me" trailer this winter.  I'm thinking of hanging my bar from the ceiling (8' trailer). 

Seems like it'd be out of the way.

[noslin]

i seen a guy who hung it from the roof of trailer inside.  i think im going to do the same thing.  at least try too

[MikenMpls]

Finished! I hung it on the wall as you all suggested


Sent from my iPhone using Tapatalk

[wideopen231]

looks good and stored out of way.Good job.