Author Topic: adjusting rollout  (Read 2737 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
adjusting rollout
« on: November 24, 2018, 08:16:57 AM »
Best way to equalize rollout on slicks. I have new set of slicks that  where pretty much dead equal.Been on car for year,on warmup stand. Checked them today and almost 1" difference with both at 7 psi(expected area of race pressure) and almost 1" difference. I know zero difference almost impossible,but closer the better.  Best way to equalize?
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: adjusting rollout
« Reply #1 on: November 24, 2018, 11:36:00 AM »
 tried shrinking larger tire. dropped pressure to 2 psi,set blow heater about 12 feet away,rotated tire every cpl minutes until even temp about 120,let cool and aired up to 7 psi. Dang almost dead on about 1/4" difference.Now how long will it stay?
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot