Author Topic: Six Cylinder Race Engine.  (Read 4600 times)

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline THE FRENCHTOWN FLYER

  • Sr. Member
  • ****
  • Posts: 360
    • View Profile
  • Your Best Time: 8.28@168 door; 9.00@147 6-cyl alt; 8.53@160 RED
  • Your Engine: 300 Ford six NA w/ crossflow and prod. heads
  • Your Track: Milan, Thompson
  • Your Vehicle: (3) Advanced Chassis altered , The Last Logghe altered, '30 RPU
  • General Location: North Coast
Re: Six Cylinder Race Engine.
« Reply #1 on: November 09, 2018, 07:02:13 AM »
There were several teams that fielded crossflow headed Ford 300 sixes. While they may not be as familiar to some as the earlier Wayne or Duggan heads for GM sixes they were and are still a dominant force in the drag racing classes that allowed the use of hybrid heads, specifically Competition Eliminator altereds and the Gas Coupe and Sedan Classes for sixes.

Some teams that immediately come to mind that used crossflow heads on their cars (and in some cases, still are using them) include:

Ambrose, Argenta, and Huettman
Bob Andrews
David Majors
Peto and Mudge
Bruce Sizemore
Sherm Sligh
Lou Olenyk
Joe Williamson
Marv Wiegand

and me.

Can anybody add to my list?