« previous next »
Pages: [1]   Go Down

Author Topic: running cable thru cage?  (Read 3579 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
running cable thru cage?
« on: October 31, 2018, 06:51:43 AM »
 Can you run cable thru roll cage if you weld sleeve thru cage for it to pass thru? Looked around specs and rules but no help. Probably over looked or its covered under different rule. Other idea was running thru top rail and out back to chute.
« Last Edit: October 31, 2018, 06:56:44 AM by wideopen231 »
Logged
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline rooman

  • Moderator
  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: running cable thru cage?
« Reply #1 on: October 31, 2018, 09:32:00 AM »
I use McKinney's chute levers and the configuration puts the cables under the shoulder hoop so I sleeve the uprights. The overall package puts the butterfly, brake lever and chute levers all in the same horizontal plane.
 I have seen a sleeved roll cage but that was on a car that was built in the early 70's and I would not want to argue with a tech guy about it in this day and age.

Roo
« Last Edit: October 31, 2018, 09:33:49 AM by rooman »
Logged
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: running cable thru cage?
« Reply #2 on: October 31, 2018, 03:21:26 PM »
Ok I'll go different route. Thanks
Logged
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: running cable thru cage?
« Reply #3 on: November 01, 2018, 10:07:31 AM »
Mine pass thru  the uprights at my shoulder.  They have for 10 years.  My uprights have brake line welded in, for the cable to slide thru.  Never had an issue, been certed by many.  Lots of cars have it that way.  Pics if you'd like.
Logged
Greg
El Dorado County, CA
www.meansracing.com

Offline janjon

  • Full Member
  • ***
  • Posts: 208
    • View Profile
  • Your Best Time: 5.74/124 1/8
  • Your Engine: SB Chev, gas, 350ish
  • Your Track: Houston Motorsports Park
  • Your Vehicle: '65-ish 150" SBC/Glide FED
Re: running cable thru cage?
« Reply #4 on: January 28, 2019, 06:22:49 PM »
I would appreciate some pics, if you're willing, thanks.
John
Logged
Just keep the same amount of stuff on the right
as there is on the left. Seeing straight ahead is highly overrated....
Pages: [1]   Go Up
« previous next »