Technical > Matt Shaff's Engine Shop

valve seals hemi

<< < (2/2)

noslin:
It's blown mechanical 426 kb block with those heads and littlefield 871.  The Edelbrock head is a good head for what we are doing. Just need to make prob 1200 or so for 7.0 guessing.  We figured if  my cast head vw could take/make 5.x lbs/cube hp that these could handle 3-3.5lb cube easily as they are far better then any vw cast head we've seen.

Thank you for all inputs. Keep em coming
Dean

coupemerc:
Ran a blown alcohol 438 hemi with Veney heads, 14-71 blower years ago. We never ran any seals (per Ken). No noticeable smoke... ever

Navigation

[0] Message Index

[*] Previous page