Classifieds (Please No Dealers) > Wanted to buy
Hilborn Nozzles/Drives
opa1:
Looking for Hilborn 12AS-14AS 1/2-20 set of eight.
Timing cover, gear set and pump drive. SBC. Might also need a pump extension to clear balancer.
Also a good pump, Waterman 400, 80A-1/2
Have a set of 20AS that I dont need. Anything out there? Finding these parts or buying new will complete my fuel system.
opa1:
Still needing a Hilborn timing cover. Any help in finding one appreciated. :)
opa1:
Ordered a new Enderle cover.
opa1:
Still looking for a set of 12AS or 14AS Hilborn nozzles. 1/2-20 up to 3.5 in length.
dusterdave173:
Alkydigger.com Mike sells his version of nozzles --they flow really tight as a group mine leak check dead on for the set
Under $200 a set get what you need He usually has used good pumps and Spud at FIE sponsor here may have used pump or will rebuild a flea market find reasonable but honest--a new pump while pricey will last forever if your cam end play and all else is correct
Good luck Get her running! I run 14's with an 80 1/2 enderle 355 CI 75 main pill have never changed the pill in years runs awesome BV leaks higher than others at 30% range with .002 on the blades with an idle bypass set up by Mike I can't even tell you what is in there--system has been trouble free runs in any weather
2 3/16ths Hilborn
Navigation
[0] Message Index
[#] Next page
Go to full version