Author Topic: Prefered port check location & pressure (Read 2580 times)

gregm784 · « **on:** April 25, 2018, 10:57:18 AM »

In my mind, i see it better that the port check be located at the dist block so the feed line stays full.

Also, my idle check is 5.5#. port check should be............? 10?

Spud Miller · « **Reply #1 on:** April 25, 2018, 05:52:45 PM »

Hi Greg!

Yup, I agree...in the distribution block is the way to go.

You just want to make sure it's closed at an idle, so typically about 15 PSI is good.

Spud

gregm784 · « **Reply #2 on:** April 25, 2018, 08:14:50 PM »

Thanks Spud

gregm784 · « **Reply #3 on:** May 05, 2018, 08:44:01 PM »

I finalized my port setup today. idle is 6# (normal for my deal) and the ports pop @ 14#. We are testing soon.

thanks for the .032s. Adding to my collection.

looking forward to having more even plug readings.

Author Topic: Prefered port check location & pressure (Read 2580 times)

gregm784

Prefered port check location & pressure

Spud Miller

Re: Prefered port check location & pressure

gregm784

Re: Prefered port check location & pressure

gregm784

Re: Prefered port check location & pressure