Technical > Dan Dishon's Transmission Den

PG cooler loop line hose size

(1/1)

noslin:
what size hose should i get for looping the line on the cooler in/out fittings.  -6 or -4?   idea on length of hose.  figure id get a pre-made one.

Paul New:
Mine was -6

noslin:
Thanks Paul

bikeguy307:
-6 is the standard. -4would be to restrictive. If you have someone who can pull the pump and remove the bypass you can put pipe plugs in case. As far as length goes 12" would be as short as I think you get away with, without kinking it.

Navigation

[0] Message Index