Author Topic: SBC MILODON DRAGSTER OIL PAN  (Read 4518 times)

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
SBC MILODON DRAGSTER OIL PAN
« on: January 18, 2018, 12:19:00 PM »
I have a perfect Milodon #31145 box type dragster oil pan for SBC two pc rear seal DS dipstick  comes with pick up
This pan is EX cond no issues   price on these has gone through the roof they are now over $400 with pick up near $50 at Summit jegs etc  I will take $350 shipped free  can't beat it if you need one
email is best dusterdave173@gmail.com   or phone 704 244 6649   Thanks David
I have always had a fascination with fast cars at the expense of more normal character development

Offline ss4

  • Jr. Member
  • **
  • Posts: 98
    • View Profile
  • Your Best Time: 5.42 @ 128 - 1/8th
  • Your Track: Northern Michigan Dragway
  • Your Vehicle: Worm Inc. 180 inch Front Engine Dragster
Re: SBC MILODON DRAGSTER OIL PAN
« Reply #1 on: January 30, 2018, 10:42:30 AM »
Dave,  what is the depth at the back of the pan? is the pickup straight down or a tube neck deal.
if you need to Hate target Laziness

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: SBC MILODON DRAGSTER OIL PAN
« Reply #2 on: January 30, 2018, 11:57:50 AM »
from block it is 7 1/2 inch but with a one piece pan gasket I would say add 3/16ths or so  I have a mile of room under my Worm with diaper and 33 in tires  pix of pick up here--it has tube that slides in pump then bolts on pump--I have run these for years work fine double trap doors etc  Thanks  my phone 704 244 6649 eastern time decent hours
I have always had a fascination with fast cars at the expense of more normal character development

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: SBC MILODON DRAGSTER OIL PAN
« Reply #3 on: January 30, 2018, 03:14:53 PM »
$320 shipped free if that helps
I have always had a fascination with fast cars at the expense of more normal character development

Offline ss4

  • Jr. Member
  • **
  • Posts: 98
    • View Profile
  • Your Best Time: 5.42 @ 128 - 1/8th
  • Your Track: Northern Michigan Dragway
  • Your Vehicle: Worm Inc. 180 inch Front Engine Dragster
Re: SBC MILODON DRAGSTER OIL PAN
« Reply #4 on: January 30, 2018, 04:32:42 PM »
sounds Good and you mean Chassis Farm Dragster. ;) sent you another email too.
if you need to Hate target Laziness

Offline George

  • Hero Member
  • *****
  • Posts: 515
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA