« previous next »
Pages: [1]   Go Down

Author Topic: Shorty PG has started hitting very hard when put into reverse  (Read 2848 times)

Offline Jaychalmers

  • Newbie
  • *
  • Posts: 8
    • View Profile
  • Your Best Time: 6.02 1/8 mile
  • Your Engine: 388 Enderle injected SBC
  • Your Track: Music City Raceway
  • Your Vehicle: Home built FED
  • General Location: Tennessee
Shorty PG has started hitting very hard when put into reverse
« on: January 15, 2018, 04:57:43 AM »
Any thoughts as to why my shorty PG (with stock case, brake, and aftermarket race internal parts), and which still runs great in both forward gears, has started to hit very hard when put into reverse, even though idle has not been increased?
Thanks.
Logged

Offline bikeguy307

  • Full Member
  • ***
  • Posts: 241
    • View Profile
Re: Shorty PG has started hitting very hard when put into reverse
« Reply #1 on: January 16, 2018, 12:16:32 PM »
Could be a couple of things, first thing is to check pressure at the reverse port. If its exceedingly High, something above 230psi it is possible the boost valve is stuck. If the pressure is normal then I would suspect a spring issue on the piston. I just did a glide a couple weeks back where the springs were laid over like Domino's. 
Logged
Pages: [1]   Go Up
« previous next »