Technical > Dan Dishon's Transmission Den

PG Racing Band Ajustment

<< < (2/3) > >>

bikeguy307:
72 inch pounds then out 3 1/2 turns. If it's a new build using a new band, I like to re-adjust after 3 to 5 runs. If its a freshen-up where the band was re-used, or a relined band, I say once at 50 passes, then you should be good for the season. We do a lot of bracket racing and put around 300 passes on a year. I can say at the end of the season the band is still spot on. The key to long band life is running a good dual ring servo. One with a lip seal, or 2 steel rings work the best.

noslin:
thanks for the input,  i had to youtube it as never had a pg before.  does it matter if its kevlar band or not?  mine has kevlar and two ring servo.
dean

bikeguy307:
No the adjustment is the same for all band materials.

noslin:

--- Quote from: bikeguy307 on August 18, 2017, 08:13:58 PM ---72 inch pounds then out 3 1/2 turns. If it's a new build using a new band, I like to re-adjust after 3 to 5 runs.

--- End quote ---

new trans, after you check 3 to 5 runs then when to check next?  20?

ty
dean

dusterdave173:
if your car "rocks" after transbrake is applied I have found that a slightly tighter band adjustment helps this

Navigation

[0] Message Index

[#] Next page

[*] Previous page