Technical > Jon's Wheel House

Ball bearings?

<< < (2/2)

dreracecar:
Be real careful on which all metal lock nut you use--- there is the split type and the crimped type. The split type has lines and the lock portion is swedged together and the "fingers" expand to create the lock. The crimped type , they just compress the top to deform the hole into a tri-angle, and by using those type , damages the threads of the part/bolt you are using them on

tony1966:
Thanks for the info, guys.  I have Anglia spindles, and castle nuts with cotter pins.  I see if i can round up some proper lock nuts from McMaster, if i don't find ones that i like, i just order up some arbor shims and shim the castle nuts.

Thanks again!

Tony

Navigation

[0] Message Index

[*] Previous page