Author Topic: HRR 2017  (Read 11148 times)

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: HRR 2017
« Reply #15 on: June 20, 2017, 04:39:06 AM »
The dragster should be in my garage this afternoon.
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: HRR 2017
« Reply #16 on: June 22, 2017, 09:25:47 AM »
Any discoveries Glenn?
Greg
El Dorado County, CA
www.meansracing.com

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: HRR 2017
« Reply #17 on: June 22, 2017, 10:36:20 AM »
Broken crankshaft





New one should be here tomorrow, rods should be here Wednesday.

Post broken part depression has set in
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Paul New

  • Hero Member
  • *****
  • Posts: 744
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: HRR 2017
« Reply #18 on: June 22, 2017, 01:19:46 PM »
Has the machine shop looked at the block yet? If so is the main line ok?

dreracecar

  • Guest
Re: HRR 2017
« Reply #19 on: June 22, 2017, 03:13:03 PM »
I was under the impression you put the alu block in

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: HRR 2017
« Reply #20 on: June 22, 2017, 07:34:03 PM »
Has the machine shop looked at the block yet? If so is the main line ok?

I am just going to plastic-gauge the new bearings, and if they come up good will rebuild and test run the engine.

I was under the impression you put the alu block in

That e engine still is not complete, but close, pictures tomorrow maybe
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline Paul New

  • Hero Member
  • *****
  • Posts: 744
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: HRR 2017
« Reply #21 on: June 22, 2017, 08:02:20 PM »
Has the machine shop looked at the block yet? If so is the main line ok?

I am just going to plastic-gauge the new bearings, and if they come up good will rebuild and test run the engine.

I've never really had much faith in plastigage preferred putting a mic on things hope everything is ok with the block

Offline DON

  • Newbie
  • *
  • Posts: 13
    • View Profile
  • Your Best Time: 6.49 /109 mph in 1/8
  • Your Engine: 302 chev.
  • Your Track: Empire dragway
  • Your Vehicle: T bodied altered
Re: HRR 2017
« Reply #22 on: June 23, 2017, 11:50:30 AM »
Glenn,I can mic that up for you if you choose .I have all the proper tools to get the best accuracy .Let me know when and what you want to do.
    Don

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: HRR 2017
« Reply #23 on: June 23, 2017, 02:16:48 PM »
Glenn,I can mic that up for you if you choose .I have all the proper tools to get the best accuracy .Let me know when and what you want to do.
    Don

The crankshaft came today and I made it out to Dan before he closed. He can cut the second key-way. Venoila is supposed to have the rods done Tuesday and I am overnighting them so they should be here Wednesday. I can get a rod and piston out to Dan and he can balance the crankshaft. When that is back in hand it will be time for assembly
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/