Author Topic: Building Zoomies  (Read 11499 times)

Offline rooman

  • Hero Member
  • *****
  • Posts: 559
    • View Profile
  • Your Best Time: 6.200/222.05 (1/4 mile--NT/F)
Re: Building Zoomies
« Reply #15 on: June 30, 2017, 01:53:17 PM »
I run a Milwaukee 18v battery for all my on board needs, t-brake, MSD mag, shiftlight.  Works great.

On Vaught's car we use the same thing to run the trans brake, MSD mag, logger and dash (Racepack V300) and also we just added a water pump to circulate coolant through the heads.

Roo
Yeah, I am from the south--any further south and I would have been a bloody penguin.

Offline Paul New

  • Hero Member
  • *****
  • Posts: 743
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Building Zoomies
« Reply #16 on: June 30, 2017, 03:33:06 PM »
I run a Milwaukee 18v battery for all my on board needs, t-brake, MSD mag, shiftlight.  Works great.

On Vaught's car we use the same thing to run the trans brake, MSD mag, logger and dash (Racepack V300) and also we just added a water pump to circulate coolant through the heads.

Roo

Not to derail the zoomies topic but I use to run one of the cam driven Kuhl River rat pumps on my dragster to circulate water through the heads

Offline retroboy

  • Full Member
  • ***
  • Posts: 221
    • View Profile
  • Your Track: Whyalla
  • Your Vehicle: FED
Re: Building Zoomies
« Reply #17 on: August 16, 2017, 04:51:41 AM »
Howdy.  My pipes are a 70 degree bend laid back until they touch each other and I welded the individual pipes to each other. Look cool and no issues with rocker arm access.