Technical > Roo Man's Room
Recommended tube bender
rooman:
^^^^^^^
Just the slight bend required at the mid plate etc. Anything like the cage and shoulder hoop requires an actual tube bender.
Roo
Mister_Fitz:
Thanks for all the good advices.
Just one more question... :)
Do I need a acetylene and oxygen gas welder or could I get away with a propane/butane (LPG) gas burner?
dreracecar:
You will need a O/A unit and a rosebud tip torch to heat the tube 360* , you can use propane if you get a roofing torch, but you have to be real careful that you dont overheat the tubing because of the size of the flame it produces
Navigation
[0] Message Index
[*] Previous page
Go to full version