Author Topic: remote battery / starter cable length  (Read 6034 times)

Offline noslin

  • Sr. Member
  • ****
  • Posts: 259
    • View Profile
  • Your Best Time: 0.00
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: west coast
remote battery / starter cable length
« on: January 22, 2017, 07:24:18 PM »
not gong to mount battery in fed.  will have in back of truck for starter.  how long should i make the cables and what gauge wire.  i'd guess 10' maybe and '0' or 'ot' or should it be '00'

should it be longer, 15'?

ty
dean

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: remote battery / starter cable length
« Reply #1 on: January 23, 2017, 04:08:35 PM »
We use a remote, hand held, battery pack, that weighs 10 lbs with cables and alum box. Most JrFuel cars use 24 volt battery because of the high compression and magneto.
The light weight battery pack because it's a lot faster/ easier than jocking the tow truck around to get it in the right spot to start. Because it is hand held, the cables are just 3 feet long. The battery is just charged at home, and don't need to charge at the races unless we have to spin the motor over a bunch because of some problem.

Jon Hansen
Jon C. Hansen

Hayden Wheels

Offline gregm784

  • Sr. Member
  • ****
  • Posts: 384
    • View Profile
    • Means Racing
  • Your Engine: 365" GenIV SBC
  • Your Track: Famoso Raceway
  • Your Vehicle: 1997 Stirling 200" FED
Re: remote battery / starter cable length
« Reply #2 on: February 15, 2017, 01:46:56 PM »
My cables ended up about 14' long. plenty long enough. I used 2/0 welding wire. 
Greg
El Dorado County, CA
www.meansracing.com