Drag Racing Discussions > Front Engine Dragsters

Chute cable mount

<< < (2/2)

gregm784:
Check out Neil & Park's solution. Bare cables, no sheaths.  I can send pictures.  simple, light,

dwrfab:
I make and sell two chute cable mounts one works at the cable to chassis location and one attaches the cable end to the chute pack flap. Just don't attach it to the bottom flap ,it could hinder the pop chute deployment. call Don at 214-327-7312

dwrfab:
Here is the other one.

H.G. Wells:
There are some nice pieces here.
KISS, I use an adel clamp at the corner of the rear of the pack. It is attached to an L bracket coming off the attachment point of the pack. Sorry no pic handy.

tony1966:
Thanks for all the reply's, some cool stuff out there.  This is what i did, I had some small aluminum bar laying around a whipped this up quickly on the mill.  Small tab with a lock nut welded to it that you can't see in the picture too well.

Thanks!

Tony

Navigation

[0] Message Index

[*] Previous page