Technical > Matt Shaff's Engine Shop

sorry need help again

<< < (3/3)

Frontenginedragsters:
Steve:
 As per our conversation, did you get a value of open valve spring pressure?
Also start to look at rocker arm geometry. 
Or call me @ 585-288-1499

Matt

hotrod316:
yes the spring pressure was in with 5lbs. what we talk about but, AND
i know better!  check ALL THE SPRINGS ( OK I'LL BENT OVER AND TAKE THE BOOT)  I only check the two on the last cam lope we lost,

wideopen231:
What kind of filter? Had bad run of FRams few years back.I killed 5.7 hemi, buddy pulled car apart and lil brother pulled his bbc in dragster down twice.All fram filter related. That's why god had man make O'bergs.LOL

hotrod316:
wix's filters (r) only, 30 weight, the green oil  brad penn
thanks
good news is, no a spun rod or main bearings
cam bearings junk looks like it may spun number 3 and 4 cam bearing, can not get the welding rod through need to check make sure there in there right holes or plugged with junk.
steve m   

Navigation

[0] Message Index

[*] Previous page