Drag Racing Discussions > Front Engine Dragsters
Some basic simple questions
Curly1:
The look I want is like a newer top fueled but with front engine. A "Newstalgia" look.
Supercat:
Roo here is the car in color, during my license runs.
Also shots of our 5pt. (6.0 cert) car.
Supercat:
Mine
masracingtd1167:
Curly That's a great looking car and 200 inches should be just fine ! I had mine built a little shorter for the same reason ! I also had mine built with a six point cage to make it easier to get my old butt in and out of the car !
Curly1:
Alright for an update. I am picking up the dragster tomorrow and will post some pictures. I will be using the motor and transmission out of my altered and car should run 4.90. When I pick it up going to put it in paint booth and strip it down to bare chassis, sand it and paint it then it goes to a friend to wire it all up. Will be using RPM digital dash and data logger. After it is wired then install motor and transission, put out any little fires and hope to run it at June 24 race. Have a nice set of Weld Alumistar fronts with new Goodyears and for the rear I have a new set of MT 15 x 15 wheels with MT 3074 tires. 4.30 rear gear. Everything from feet forward is new and all body panels are new. I had them make quite a few changes from original so it is more user friendly and now has room for full dash for switches etc. This car looks different than all others out there and has a newer top fuel style to it while keeping the Front engine nostalgia look.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version