« previous next »
Pages: [1]   Go Down

Author Topic: CFM of hilborn injection  (Read 2892 times)

Offline crider

  • Full Member
  • ***
  • Posts: 206
    • View Profile
  • Your Best Time: 5.01
  • Your Engine: BBC
  • Your Track: farmington, Nc
  • Your Vehicle: in progress
  • General Location: south east
CFM of hilborn injection
« on: February 26, 2017, 03:05:50 PM »
Almost finished gathering parts to put a real engine together for my car. I have picked up a hilborn stack injector for BBC, 2 7/16 butterflys, and I was curious as to how much air it is capable of moving. Anyone know the CFM of these units? Numbers per runner? Going on a 604" with heads that are doing 410 cfm at .700 lift
Logged

dreracecar

  • Guest
Re: CFM of hilborn injection
« Reply #1 on: February 26, 2017, 04:40:37 PM »
At least 410 cfm per runner. If you cut a 2  7/16  circle and it covers most of the port your fine
Logged

Offline crider

  • Full Member
  • ***
  • Posts: 206
    • View Profile
  • Your Best Time: 5.01
  • Your Engine: BBC
  • Your Track: farmington, Nc
  • Your Vehicle: in progress
  • General Location: south east
Re: CFM of hilborn injection
« Reply #2 on: February 26, 2017, 05:21:18 PM »
Ok, Thanks Bruce. I wasn't sure how much the dogleg in the runners hurt flow of the manifold
Logged
Pages: [1]   Go Up
« previous next »