Technical > Roo Man's Room

Anti-Rotation Bracket Ideas - 57-64 Olds

<< < (4/4)

Countn Carbs:

--- Quote from: rooman on February 27, 2017, 03:31:34 AM ---
--- Quote from: crider on February 26, 2017, 05:24:40 PM ---Kinda looks like you have the whole drivetrain mounted too low in the chassis?

--- End quote ---

I agree. As it sits now it appears that you will have something like 9" or 10" of ground clearance with any sort of reasonable tire diameter.

Roo

--- End quote ---

Thanks Guys - Slick diameter is 28.5" and when I had it mocked up and sitting on the ground I had about 6" of ground clearance.   I could move everything up in the chassis a bit which would help keep the anti-rotation tabs up.

Countn Carbs:

--- Quote from: janjon on February 27, 2017, 05:40:37 AM ---What will the kidney bars look like?

--- End quote ---

Planning on the same tubing (1.500" OD x .125" wall) and its' looking like 3 per side and a couple in the back with a center pipe tying them together horizontally.  I've been keeping the lead tech inspector at Bandimere in the loop on this as well.  We'll be running in Vintage class and need to keep the car slower than an 11.50.

Navigation

[0] Message Index

[*] Previous page