WANTED: 16x10 wheels

[30dodgeboy]

Looking for old-school wheels, like Halibrand or 5-spoke American, 4.5" bolt circle

[Paul New]

 Not sure you will find that bolt patern in a 16x10 most 16" wheels were used with 5 on 5.5 or 5 on 5 unless you find a multi drilled set

[30dodgeboy]

I agree its hard to find that pattern, but they do exist

[dreracecar]

ET III  wheels has a 5 spoke wheel   16 x 9.5   and does drill them 5 x 4.5 bc  around $400 each new and their "Fueler" style is a Halibrand look-a-like and is available 16 x 10 , drilled and around $350 ea. They offer your choice of back space as they a machined to order. Company been around since the 60's

[ricardo1967]

ET III  wheels has a 5 spoke wheel   16 x 9.5   and does drill them 5 x 4.5 bc  around $400 each new and their "Fueler" style is a Halibrand look-a-like and is available 16 x 10 , drilled and around $350 ea. They offer your choice of back space as they a machined to order. Company been around since the 60's

Beautiful wheels, are the good for racing? Meet SFI?

[dreracecar]

Certain class cars need SFI cert.   Racing with these wheels have not been an issue except for their weight vs the spun type, Ran cast alu rears on my 7.0 car for over 20 years

[Paul New]

Not to be a smart Alec but 7.0 hasn't been around for 20 years 

[dreracecar]

Built in 1995 ,Ran 6.90 in exhib, slowed it down for NE1, tuned it back up for when 7.0 became a class. Won the very first 7.0Pro race held

[ricardo1967]

Built in 1995 ,Ran 6.90 in exhib, slowed it down for NE1, tuned it back up for when 7.0 became a class. Won the very first 7.0Pro race held

Not too shabby credentials Bruce 

[JeffV8]

Look up American Rebel wheels. Nice wheels. Will drill to your bolt pattern.