Author Topic: WANTED: 16x10 wheels  (Read 5732 times)

Offline 30dodgeboy

  • Newbie
  • *
  • Posts: 31
    • View Profile
  • Your Engine: 1956 354 Chrysler on gas... for now
  • Your Track: Byron Dragway
  • Your Vehicle: 144" FED and a few 67 Coronets
WANTED: 16x10 wheels
« on: February 16, 2017, 06:14:28 PM »
Looking for old-school wheels, like Halibrand or 5-spoke American, 4.5" bolt circle
« Last Edit: February 16, 2017, 06:16:52 PM by 30dodgeboy »
2018 Meltdown Drags - July 20-22 Byron, Illinois

Offline Paul New

  • Hero Member
  • *****
  • Posts: 744
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: WANTED: 16x10 wheels
« Reply #1 on: February 16, 2017, 07:03:35 PM »
 Not sure you will find that bolt patern in a 16x10 most 16" wheels were used with 5 on 5.5 or 5 on 5 unless you find a multi drilled set

Offline 30dodgeboy

  • Newbie
  • *
  • Posts: 31
    • View Profile
  • Your Engine: 1956 354 Chrysler on gas... for now
  • Your Track: Byron Dragway
  • Your Vehicle: 144" FED and a few 67 Coronets
Re: WANTED: 16x10 wheels
« Reply #2 on: February 17, 2017, 04:57:20 AM »
I agree its hard to find that pattern, but they do exist
2018 Meltdown Drags - July 20-22 Byron, Illinois

dreracecar

  • Guest
Re: WANTED: 16x10 wheels
« Reply #3 on: February 17, 2017, 08:15:10 AM »
ET III  wheels has a 5 spoke wheel   16 x 9.5   and does drill them 5 x 4.5 bc  around $400 each new and their "Fueler" style is a Halibrand look-a-like and is available 16 x 10 , drilled and around $350 ea. They offer your choice of back space as they a machined to order. Company been around since the 60's
« Last Edit: February 17, 2017, 08:20:41 AM by dreracecar »

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: WANTED: 16x10 wheels
« Reply #4 on: February 17, 2017, 12:26:15 PM »
ET III  wheels has a 5 spoke wheel   16 x 9.5   and does drill them 5 x 4.5 bc  around $400 each new and their "Fueler" style is a Halibrand look-a-like and is available 16 x 10 , drilled and around $350 ea. They offer your choice of back space as they a machined to order. Company been around since the 60's
Beautiful wheels, are the good for racing? Meet SFI?

dreracecar

  • Guest
Re: WANTED: 16x10 wheels
« Reply #5 on: February 17, 2017, 03:37:58 PM »
Certain class cars need SFI cert.   Racing with these wheels have not been an issue except for their weight vs the spun type, Ran cast alu rears on my 7.0 car for over 20 years

Offline Paul New

  • Hero Member
  • *****
  • Posts: 744
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: WANTED: 16x10 wheels
« Reply #6 on: February 17, 2017, 03:54:24 PM »
Not to be a smart Alec but 7.0 hasn't been around for 20 years  ;D
« Last Edit: February 18, 2017, 06:59:01 PM by Paul New »

dreracecar

  • Guest
Re: WANTED: 16x10 wheels
« Reply #7 on: February 17, 2017, 06:12:55 PM »
Built in 1995 ,Ran 6.90 in exhib, slowed it down for NE1, tuned it back up for when 7.0 became a class. Won the very first 7.0Pro race held

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: WANTED: 16x10 wheels
« Reply #8 on: February 17, 2017, 06:21:55 PM »
Built in 1995 ,Ran 6.90 in exhib, slowed it down for NE1, tuned it back up for when 7.0 became a class. Won the very first 7.0Pro race held
Not too shabby credentials Bruce  ;)

Offline JeffV8

  • Sr. Member
  • ****
  • Posts: 260
    • View Profile
  • Your Track: Quaker city
  • Your Vehicle: 164" Woody Gilmore Flexie
Re: WANTED: 16x10 wheels
« Reply #9 on: February 20, 2017, 11:24:32 PM »
Look up American Rebel wheels. Nice wheels. Will drill to your bolt pattern.