Drag Racing Discussions > Front Engine Dragsters

Where is everyone

(1/4) > >>

racerken:
Have not seen a new post in several days.  Just want to make sure my computer is working.   Anyway,  Merry Christmas to all.

nostalgic371:
I was thinking the same thing, I had to make sure I was logged in!

Roger:
Merry Christmas to you racerken and Merry Christmas to everyone else on the site!

Scott Krieger:
I agree.

Working on making the Car & Effort a lil better from this years schooling.

For us it's about bottom bulb No-E bracket racing. Here at LVMS we race 1/4 mile normally. But the biggest bracket race of the year is here at LVMS, The Spring Fling 4/11-4/15/17. They race 1/8 mile so we are focusing on that set-up. Lost a motor just before last years race and missed out, so were laying low and getting ready for this years race.

Looking at adding header flaps to keep rocks out. Seen some the diesel guys use for their stacks to keep out rain thats nice with the rubber. I do not want to here the clatter.
I'm thinking of just putting a beveled piece inside the collector with a couple ears bent on it. Run a long bolt across the top of the collector from side to side to swing it on.

Thanks

Scott Krieger:
Also changing out our rubber radiator hoses, ones 4' long the other a total of 5' long now.
I'm looking at adding 2' to each side by flipping the Radiator and switching to metal lines to help dissipate heat. Possibly?
Having water in metal lines instead of rubber hose in front of the driver and back tires seems to make sense also.

Liking something like this. With our 174" triple slip joint chassis that likes being free.

http://www.assaultracing.com/item/172531-radiator-hose-kit-48-stainless?category=8012

What are some of you Boys using?

Thanks

Navigation

[0] Message Index

[#] Next page