Author Topic: bbc pump  (Read 3423 times)

Offline crider

  • Full Member
  • ***
  • Posts: 206
    • View Profile
  • Your Best Time: 5.01
  • Your Engine: BBC
  • Your Track: farmington, Nc
  • Your Vehicle: in progress
  • General Location: south east
bbc pump
« on: December 11, 2016, 05:15:06 AM »
I just picked up a used hilborn stack injection manifold for a bbc. It's a 2 7/16 butterfly model, currently setup for gas. Planning to send it out to be swapped over to methanol. My question is, what size pump will I need for that? Also what other pieces do I need, besides a fuel shutoff? As of now it's just the manifold with nozzles, hoses and barrel valve.

dreracecar

  • Guest
Re: bbc pump
« Reply #1 on: December 11, 2016, 08:17:12 AM »
6.5 gal, that way you can trim it down and later if you switch to blown you don't have to buy a new pump

Offline crider

  • Full Member
  • ***
  • Posts: 206
    • View Profile
  • Your Best Time: 5.01
  • Your Engine: BBC
  • Your Track: farmington, Nc
  • Your Vehicle: in progress
  • General Location: south east
Re: bbc pump
« Reply #2 on: December 11, 2016, 08:43:23 AM »
Thanks Bruce. So that would be an 80a-1 in an enderle, what hilborn pump is that equal to?

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: bbc pump
« Reply #3 on: December 11, 2016, 10:37:24 AM »
hilborn 150 is just under 7 gpm
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline crider

  • Full Member
  • ***
  • Posts: 206
    • View Profile
  • Your Best Time: 5.01
  • Your Engine: BBC
  • Your Track: farmington, Nc
  • Your Vehicle: in progress
  • General Location: south east
Re: bbc pump
« Reply #4 on: December 11, 2016, 10:44:59 AM »
Ok, thanks