« previous next »
Pages: [1]   Go Down

Author Topic: Burn Out  (Read 4635 times)

Offline BK

  • Sr. Member
  • ****
  • Posts: 310
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Burn Out
« on: November 24, 2016, 06:33:41 AM »
I saw this covered a couple times but I didn't see your thoughts on burn outs.
Seems majority favors 2nd gear burnouts. I was told that is tough on 2nd gear and to start in 1st and hit second as soon as tires start spinning.
Can we get your thoughts?
Logged

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: Burn Out
« Reply #1 on: November 24, 2016, 07:00:31 AM »
Yea Dan I have had same question--I started doing them in first and have recently started in high gear which works way better--I did not like shifting during the burn out--hard enough trying not to run over the mop man LOL
Logged
I have always had a fascination with fast cars at the expense of more normal character development

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: Burn Out
« Reply #2 on: November 24, 2016, 08:20:04 AM »
Reason for 2nd gear  burnout is imply more tire speed quicker.No harm to trans.Actually probably easier on parts.
Logged
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: Burn Out
« Reply #3 on: November 24, 2016, 08:46:48 AM »
As long as your tires are wet before you hit the throttle, not IN the water box, just a lttle out of the water.
Logged
Jon C. Hansen

Hayden Wheels

Offline bikeguy307

  • Full Member
  • ***
  • Posts: 241
    • View Profile
Re: Burn Out
« Reply #4 on: November 27, 2016, 03:18:05 PM »
Sorry for the late answer, I was off the grid on a short vacation for the holiday weekend. If you are doing a burnout with a line lock, then low to high is my suggestion, with a quick shift to high. If you do a rolling or standing with no line lock then high is the way. These are the methods my son and I use with our cars, The Camaro the first method and the Roadster with the second. No matter which you use the key is to have the rpms high enough to stay up in the converter. I see alot of guys hit the tires and drive thur the converter on the burn out. This is hard on the converter.
Logged
Pages: [1]   Go Up
« previous next »