Author Topic: thoughts  (Read 4854 times)

Offline hotrod316

  • Sr. Member
  • ****
  • Posts: 352
    • View Profile
thoughts
« on: December 01, 2016, 12:03:16 PM »
Matt,
our new fed  motor was a 468 bbc 13 to 1, we loss number 4 intake lobe so i have to get a new cam. here is the question i need thoughts on. I want to  run a 6-71 blower (street) not striped, on bud, 34-35* total timing. max 5-6 lbs boost, 20-25% under drive, just looking for thoughts will it live at all, not looking to turn the world backwards!
just love the looks of that big sweet blower in your face.
bbc 468
steel crank
13-1 forged pistons
closed chamber heads
GM rods with good ARP bolts
2 bolt mains
all studs main and heads
 
steve morgan

 as always thanks for your time because time is all we have
   

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: thoughts
« Reply #1 on: December 01, 2016, 03:33:51 PM »
It looks like a recipe for happiness.

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: thoughts
« Reply #2 on: December 01, 2016, 08:04:54 PM »
Steve:
 Your idea is a good one.
I would suggest some changes.
Trade the closed chamber heads for open chambers.
Most closed chamber heads are about 106cc's and the open chambers are aboubt 118.
This will lower the compression ratio to about 11 to 1 and that is very blower / alcohol friendly.
When you purchase your camshaft choose a wide lobe separation like 114*.
Have Fun !!

Matt
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/

Offline hotrod316

  • Sr. Member
  • ****
  • Posts: 352
    • View Profile
Re: thoughts
« Reply #3 on: December 02, 2016, 07:58:35 AM »
COOL, THANKS!
will post pics really soon ;D
anybody have a set of open chamber heads ;)

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: thoughts
« Reply #4 on: December 02, 2016, 05:16:32 PM »
Steve:
 Where do you live?
I have cast iron open chamber rectangle port heads to sell.

Matt
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/

Offline hotrod316

  • Sr. Member
  • ****
  • Posts: 352
    • View Profile
Re: thoughts
« Reply #5 on: December 03, 2016, 10:18:39 AM »
Matt, we are in Dayton ohio

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: thoughts
« Reply #6 on: December 03, 2016, 11:46:17 AM »
Dayton OH.
We just drove there last week end.
Im in Rochester, NY

Matt
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/