Drag Racing Discussions > Front Engine Dragsters

weight of FED

<< < (2/2)

aafa760:
1971 with me @ 250# full of fuel ready to run

rooman:
Horan's NT/F when it had the Donovan was 1930 with me (210 lbs) in it, suited up. Ti can, reverser, dry sump tank (with 3 gallons of 70 wt), twin chutes etc.

Roo

Paul New:
1800 lbs race ready 3-speed B&J, steel can, 3 gallons of oil dry sump, and my 220lbs

Pipe Dreams:
1583 raceready. R3 full water small block mopar, aluminum Indy heads. With 280 pounds of ballast, 235 of which is on the wrong end..... also known as the driver

JrFuel Hayden:
If you would race NHRA Heritage A/FD [ blown alky or injected nitro] min weight is 1875, with driver.
I pay attention to the car weights, because NHRA has a max car weight, NO driver, at 1800 lbs for wire spoke wheels,
No min weight limit for 7.0 Pro, but blown cars or cars than might go 200 mph need two chutes.
Jon

Navigation

[0] Message Index

[*] Previous page