Poll

What gear ratio are you running?

3.50
1 (16.7%)
4.11
5 (83.3%)

Total Members Voted: 6

« previous next »
Pages: [1]   Go Down

Author Topic: Feds about done with a 632 chevy.  (Read 9953 times)

Offline PANK

  • Newbie
  • *
  • Posts: 7
    • View Profile
Feds about done with a 632 chevy.
« on: February 11, 2013, 05:49:45 PM »
Has a 34 tire.
« Last Edit: May 31, 2013, 03:00:26 PM by PANK »
Logged

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
Re: Feds about done with a 632 chevy.
« Reply #1 on: February 11, 2013, 07:52:16 PM »
With 632 what you making about 1150 hp? If cars built half way lite(guessing about 1400 w/o driver maybe little less) it should really hump. What kind of et you shooting for?
« Last Edit: February 11, 2013, 08:19:18 PM by wideopen231 »
Logged
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline PANK

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Feds about done with a 632 chevy.
« Reply #2 on: February 12, 2013, 05:24:43 AM »
7 flat 6.80.It will run on alky.
Logged

Offline Larry Gocha

  • Jr. Member
  • **
  • Posts: 86
    • View Profile
Re: Feds about done with a 632 chevy.
« Reply #3 on: February 12, 2013, 09:32:22 AM »
clutch or glide
Logged

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1110
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: Feds about done with a 632 chevy.
« Reply #4 on: February 12, 2013, 03:36:39 PM »
There is a guy here in division 1 who runs a 632 in a fed in Top Dragster . He has run some 7.1's with it and is still working out the bug's . Good luck it should be fast.
Logged

Offline PANK

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Feds about done with a 632 chevy.
« Reply #5 on: February 12, 2013, 05:51:50 PM »
running a glide
Logged

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: Feds about done with a 632 chevy.
« Reply #6 on: February 12, 2013, 06:10:43 PM »
Looks great! What's the wheelbase? Have wheelie bars, right?
Logged

Offline PANK

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: Feds about done with a 632 chevy.
« Reply #7 on: February 12, 2013, 06:46:41 PM »
Yes I do wanna borrow them.
Logged

Offline BCCOWANWEELS

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: 7.60 IN 1/4 MILE
  • Your Engine: BBC
  • Your Track: BRISTOL "THUNDER VALLEY"
  • Your Vehicle: REPRO LOGGHE BROS F.E.D. DRAGSTERS
Re: Feds about done with a 632 chevy.
« Reply #8 on: May 03, 2013, 07:44:59 PM »
BIG INCHES MEANS LOWER RPM,S AND MORE TORQUE SO LOWER NUMBER GEARS AND LET THE ENGINE WORK WHERE ITS COMFORTABLE. I ALSO HAVE A 632" BBC, I LIKE TO SHIFT IT AT ABOUT 6500 RPMS.
Logged
I BELIEVE IN JOHN 3:16

Offline Cajuninjector

  • Jr. Member
  • **
  • Posts: 64
    • View Profile
  • Your Best Time: 7.50@176
  • Your Engine: SBC 406 Alky Stacked Hilborn
  • Your Track: SWJFA
  • Your Vehicle: 225" FED-Wizard Race Cars
Re: Feds about done with a 632 chevy.
« Reply #9 on: May 03, 2013, 09:02:52 PM »
Logged
Go Hard or Go Home
Pages: [1]   Go Up
« previous next »