Author Topic: Nostalgia 102" iron 392 hemi Topolino front end question  (Read 13121 times)

Offline Merryknees

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: 7.90 / 170mph 1/4mile
  • Your Engine: blown methanol 392 hemi
  • Your Track: Jurby, isle of man
  • Your Vehicle: 39 Topolino + 41 Willys coupe
  • General Location: Isle of Man UK
Re: Nostalgia 102" iron 392 hemi Topolino front end question
« Reply #15 on: June 03, 2017, 01:36:47 AM »
Thanks for the reply dreracecar
I will take your advise and set up accordingly.
Will give it a go a three weeks time and report back  8)

Offline Merryknees

  • Newbie
  • *
  • Posts: 25
    • View Profile
  • Your Best Time: 7.90 / 170mph 1/4mile
  • Your Engine: blown methanol 392 hemi
  • Your Track: Jurby, isle of man
  • Your Vehicle: 39 Topolino + 41 Willys coupe
  • General Location: Isle of Man UK
Re: Nostalgia 102" iron 392 hemi Topolino front end question
« Reply #16 on: June 27, 2017, 12:50:38 PM »
Just wanted to thank all that advised on the handling problems, especially dreracecar.
We had our first outing at the weekend and the car felt so much more stable than before.
We have uprated the front springs from 220lb per side to 500lb per side and stiffened the shocks. Also scaled the car and set at equal fronts + equal rears. Lauched at 2000rpm without brake, arrow straight. Arrow straight burnout, whereas before the car would tend to drift to the right. Not tried a higher launch RPM as yet due to insufficient runs and chasing a missfire.
Thanks guys

Offline Maryannchats

  • Full Member
  • ***
  • Posts: 196
    • View Profile
    • check over here p40ipw
  • Your Best Time: Etoxorub
  • Your Engine: Ovycubi
  • Your Track: Ybipu
  • Your Vehicle: Ovuhyqe
  • General Location: Esewi
helpful hints x78zbu
« Reply #17 on: July 28, 2024, 10:33:04 PM »