Author Topic: starter for Iron Duke  (Read 4392 times)

Offline 32bantam

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • SS3 Race Team
  • Your Best Time: 6.87 at BG 2013 aiming for 7.0
  • Your Track: Empire Dragway, NY
  • Your Vehicle: 32 Bantam altered
starter for Iron Duke
« on: July 30, 2016, 08:09:26 AM »
I fellow racer needs a aftermarket starter for a Iron Duke. (left side mount). Tilton (part# 54-10011) stopped making them and can't find anyone else.
Anybody got one lying around?
thanks,
Steve
Steve Walczak

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1110
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: starter for Iron Duke
« Reply #1 on: July 30, 2016, 09:45:21 AM »
Steve Try going on inside comp racing forum . A lot of those guy's run that block in the 4 cyl classes !

dreracecar

  • Guest
Re: starter for Iron Duke
« Reply #2 on: July 30, 2016, 09:57:14 AM »
all the basic starters are the same motor just the adapt is different, since Tilton is not making them anymore, you can always try and ask for the drawings/prints and machine your own.

Offline H.G. Wells

  • Full Member
  • ***
  • Posts: 116
    • View Profile
  • Your Engine: Mild 383 SBC or 498 blown BBC
  • Your Track: Currently San Antonio, past Amarillo, Ardmore OK, Noble OK
  • Your Vehicle: late 60's FED of unknown origin
Re: starter for Iron Duke
« Reply #3 on: July 30, 2016, 03:29:52 PM »
Might try Greg Porter.
http://www.gpestarters.com/
Racecar spelled backwards is racecaR

Offline 32bantam

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • SS3 Race Team
  • Your Best Time: 6.87 at BG 2013 aiming for 7.0
  • Your Track: Empire Dragway, NY
  • Your Vehicle: 32 Bantam altered
Re: starter for Iron Duke
« Reply #4 on: July 31, 2016, 04:11:59 AM »
Thanks for the suggestions !!!!  I will pass them along...
Steve Walczak