Author Topic: Newby with some questions about FED's  (Read 5097 times)

Offline kilroy1930

  • Newbie
  • *
  • Posts: 3
    • View Profile
  • Your Best Time: none
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: Bay area
Newby with some questions about FED's
« on: April 27, 2016, 06:14:38 PM »
Hey everybody, I'm very excited to be joining everybody racing and enjoying a FED.  I have been hooked on these cars since i was a kid, and finally have the funds saved up to embark on this journey.  I am hoping to race in a nostalgia eliminator class.  I am currently looking at some cars on racingjunk and also if anybody has a car or knows anybody selling one i would definitely be interested.  One of the cars I'm looking at is a 185" wheelbase car that has a 387 cubic inch injected small block.  Says it runs 8.3's in the quarter.  I contacted the owner and he stated that the car has about a 100 passes on it.  They have done basic maintenance but nothing major.  Is that a lot of passes for that engine?  Is it time to go thru it?  When do you guys start going thru your engines? 

Offline digster

  • Jr. Member
  • **
  • Posts: 89
    • View Profile
  • Your Best Time: 8.01 1/4
  • Your Engine: Hilborn Injected 427 SBC (Methanol)
  • Your Track: Top End Raceways, Sabin Mn
  • Your Vehicle: 1970 190 inch FED
Re: Newby with some questions about FED's
« Reply #1 on: April 27, 2016, 06:35:12 PM »
Welcome to FED
My 2 cents would be make sure the car has a current certification tag.
On the engine I'd only pay core price on it unless it is a "known engine".

Offline hotrod316

  • Sr. Member
  • ****
  • Posts: 352
    • View Profile
Re: Newby with some questions about FED's
« Reply #2 on: April 27, 2016, 06:38:44 PM »
WELCOME LILROY 1930 you have pics of my fed for sale
hotrod316 steve m 8) 8)

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1110
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: Newby with some questions about FED's
« Reply #3 on: April 28, 2016, 12:23:31 PM »
Any time you are buying a used motor it would be wise to take it apart and take a good look at everything . Also to verify that the seller is giving you what he say's it is !

Offline kilroy1930

  • Newbie
  • *
  • Posts: 3
    • View Profile
  • Your Best Time: none
  • Your Engine: none
  • Your Track: none
  • Your Vehicle: none
  • General Location: Bay area
Re: Newby with some questions about FED's
« Reply #4 on: April 29, 2016, 04:04:15 PM »
Ya the more research I do, the more I'm leaning towards a roller.  Thanks for the feedback.