ok gang, trying to figure out the plumbing on this pump, read somewhere hilborn no longer recomends using certain ports on their pumps. this is the same pump as before, thinking its a pg-150b with the center 5 ground down to a single point, can read pg-1.0B so we will say it is.
have blocked off the "relief" port and wanting to use the "bypass" fir our main idle circuit. would be alright in your book spud...
here is some pic glory saorry for so small couldnt get below the 150kb index (tryed putting boost and nitro to it)
thanks matt
PS- just any new radiator hose for an import for my 1" fuel hose to connect my tank will be methanol and nitro safe right? just wanted to be sure, thanx again