Drag Racing Discussions > Front Engine Dragsters
Newby with Questions
digster:
We're giving Worst case scenario but you do need to jump threw the hoops. It's the world we live in.
Oldford 65:
Thanks for the info. The tubing is .058, that the measurement that I came up with.
George:
--- Quote from: Oldford 65 on April 03, 2016, 07:03:36 AM ---Thanks for the info. The tubing is .058, that the measurement that I came up with.
--- End quote ---
If you are going to try to determine its possible spec. at least buy a SFI book. http://sfifoundation.com/drag-racing-chassis/
DON'T guess or hope it will meet spec. You could be as I found our chassis to be. I hope not but it happens all the time. George
Oldford 65:
Thanks. I'll get the book.
Oldford 65:
Got chassis certified to 7.50, no problems. Motor ,tranny and coupler hooked up. Shifter mounted. New slicks. Hopefully it will be ready in a month.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version