weight of FED

[noslin]

guestimates of 225" fed with bbc injected and blown.   with powerglide & 9" without driver. 

ty
dean

[aafa760]

My Frameworks 225" Shorty body BBC blown with 2 spd lenco and clutch weighs in at 1720. last time I weighed it after run.

[noslin]

thats without you correct?   

ty
dean

[Frontenginedragsters]

No reason to weigh it without the driver in it and fire suit on and fuel in the tank.
My 225" FED with a BBF injected with a steel bellhousing and two speed Lenco wieghs 1750 loaded.
I'm 210 lbs.

Matt Shaff

[noslin]

thats not bad at all, i was thinking about 1900 with driver. 

ty for your reply
dean

[aafa760]

1971 with me @ 250# full of fuel ready to run

[rooman]

Horan's NT/F when it had the Donovan was 1930 with me (210 lbs) in it, suited up. Ti can, reverser, dry sump tank (with 3 gallons of 70 wt), twin chutes etc.

Roo

[Paul New]

1800 lbs race ready 3-speed B&J, steel can, 3 gallons of oil dry sump, and my 220lbs

[Pipe Dreams]

1583 raceready. R3 full water small block mopar, aluminum Indy heads. With 280 pounds of ballast, 235 of which is on the wrong end..... also known as the driver

[JrFuel Hayden]

If you would race NHRA Heritage A/FD [ blown alky or injected nitro] min weight is 1875, with driver.
I pay attention to the car weights, because NHRA has a max car weight, NO driver, at 1800 lbs for wire spoke wheels,
No min weight limit for 7.0 Pro, but blown cars or cars than might go 200 mph need two chutes.
Jon