Author Topic: Chute Mount  (Read 3351 times)

Offline digster

  • Jr. Member
  • **
  • Posts: 89
    • View Profile
  • Your Best Time: 8.01 1/4
  • Your Engine: Hilborn Injected 427 SBC (Methanol)
  • Your Track: Top End Raceways, Sabin Mn
  • Your Vehicle: 1970 190 inch FED
Chute Mount
« on: March 08, 2016, 11:13:45 AM »
 My old chute is kind of like its owner, tattered from being deployed too many times!
Tech has never hassled me but I doubt if the mounting is legal. The aluminum plate on the dragster side had been relieved and a small hole cut in the bag. This allows the chute main lanyard to go straight threw the pack to a half inch bolt. The main lanyard  all coils up first. Never hanging down. It's positioned in such a way that it can touch nothing metallic when deployed.  It was mounted this way when I bought it and has never failed me. Ever seen this before? Has a clean look but it's the only one I know of this way so its gotta be wrong.
« Last Edit: March 08, 2016, 05:47:37 PM by digster »

dreracecar

  • Guest
Re: Chute Mount
« Reply #1 on: March 08, 2016, 12:10:22 PM »
No spec on mounting the pack and going thru the center of the pack is/was common when using a chute tail body. Look at pics of cars with tails on them and no exposed tow lines