Technical > Dan Dishon's Transmission Den

Direct drive

<< < (4/4)

Ponti:
Thanks guys, will keep my eyes open. Looking at the picture of the Lenco reverser, how do you fit it direct to a bellhousing.

sknopp:
To mount that reverser you need to make an adapter plate.  There are also reverse units that bolt directly to the bell housing.

Does the facility where you will race mandate a reverser?  If not, you could run without one.  Just burn our behind the line, or have a couple buddies push you back.

Steve K.

Ponti:
Problem I have is I don't have a large crew, will normally only be just 2 of us so the reverser will just make life easier if I roll over the line.

Navigation

[0] Message Index

[*] Previous page