Drag Racing Discussions > Front Engine Dragsters

wires etc from driver to front

<< < (3/3)

ricardo1967:
Thanks for the picture Bill. That's exactly what I have in mind with mine.

PS.: You have a very well setup car!

Van:
 I recently added one on each side of my Dragster, but I used Airframe oval tubing (strut tube) I can stack 3 cables easily on each side. This looked to be an easy way to get the job done with less drilling & welding and gets everything through in one place down low. I drilled the starter hole and used a die grinder to shape the hole to the tubing.

Navigation

[0] Message Index

[*] Previous page