Technical > Roo Man's Room

Slick Screwing

<< < (3/3)

BK:
I remember reading once at around 8psi and up you shouldn't need screws anymore. I couldn't tell you if its accurate.

dreracecar:
Hard to run beadlocks if for nostalgia purposes you are running a cast wheel. The wheel should always be 2" narrower then the tire tread so it stands up straight  on the burnout. Having the wheel same side as the tire pulls the beads together as they stand up.

 True on the air pressure deal and most tires now like the higher pressure because compounds and tracks are better

ricardo1967:
Not to distract the purposeful tech talks here, but someone can make some money by selling the title of this thread as a slogan to the K-Y jelly company. ;D

digster:
It was only a mater of time ric. Keep your mind between the stacks and on the track  ;D
On my last tube chassis Roadurnner I used 8 screws per side.
My sons door slammer ran 16.
On My Fed I've ben using only 5.
Most of the guys I run with Bead lock but I see everything

Navigation

[0] Message Index

[*] Previous page