Technical > Spud Miller's Cave

Tank vent

(1/1)

wideopen231:
I don't see a problem with this,but if I could see everything I would have won the lottery few times. I have a 1/2" line welded into top front of tank running back to rear and down w/#8 so I can cap it off when not at track to keep moisture and dirt out.If questionable I cam add another line on left side.

 Pump is 7gpm DSR using less than half and return to tank.Also #6 return. Any flow problems anyone forsee?

Spud Miller:

 Should be just fine.

 Spud

dreracecar:
Close off the bottom outlet and fill the tank with water, tip the tank at 45* (fluid angle @ 1g) and remove the outlet cap. If the fluid exits completely  as a strong steady flow, your fine---any surging of fluid and you will have to re-think the vent.

Navigation

[0] Message Index