Technical > Matt Shaff's Engine Shop

Crankshaft for SBC blower combo.

(1/1)

George:
Any experience here with Ohio crankshaft? I looked at a PN 4350348Bb at the PRI show. A package deal might be in the works?

Thank you. George

dreracecar:
Will they make one with a BBC snout?

George:
Yes,http://www.ohiocrank.com/chevysb_cranks.html




 HEAVY DUTY SMALL BLOCK CRANKSHAFTS WITH
 BIG BLOCK CHEVY FRONT SNOUT DIMMENSIONS
• Material 4340 nitrided • Smaller lightening holes
• Redesigned counter weights for more strength front to back
• Optional heat treating and tempering process available
• Extra key ways $50 ea • Chain sets and covers available
 

Part Number

Model

Price

 
4350348BB 4340 SBC BB Snout, 350 mains, 3.48" stroke $945
4350375BB  4340 SBC BB Snout, 350 mains 3.75" stroke $945
4350400BB 4340 SBC BB Snout, 400 mains, 4.00" stroke $945
4400375BB 4340 SBC BB Snout, 400 mains, 3.75" stroke $945
4400400BB 4340 SBC BB Snout, 400 mains, 4.00" stroke $945
 

Frontenginedragsters:
 I was at PRI but did not look at what OhiO Crankshaft had to offer.
My understanding is they purchase Chinese forgings just like most others, IE: Scat, Eagle and many more.
Can't throw them under the bus for that, Most of those cranks are fine for the type of racing we do.
The companies with USA made forgings are higher cost. The last time I ordered a S.B. with a B.B. snout I bought Callies.
It was perfect in every way and very nice finish machine work. Cost was much more as what you have listed from Ohio.

Matt

Navigation

[0] Message Index