« previous next »
Pages: [1]   Go Down

Author Topic: SBC bearings  (Read 4264 times)

Offline gasserx

  • Full Member
  • ***
  • Posts: 192
    • View Profile
  • Your Best Time: 1/4 - 9.08
  • Your Track: Gardermoen Raceway
  • Your Vehicle: 180" FED
SBC bearings
« on: October 08, 2015, 12:52:00 PM »
Im going to buy new rod and main bearings, but seems like the bearings i have now is out of production.
They are Clevite CB663H and MB2509H
What bearings do you recomend? Std size. Sbc alky
« Last Edit: October 08, 2015, 12:57:04 PM by gasserx »
Logged

dreracecar

  • Guest
Re: SBC bearings
« Reply #1 on: October 08, 2015, 04:48:22 PM »
Akerly & Childs  ask for Roger McMartin
Logged

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: SBC bearings
« Reply #2 on: October 09, 2015, 03:29:25 AM »
663H available everywhere here easy as pie--The mains can be replaced with any "H" style to work with aftermarket cranks most here use the MS909-H again..easy as pie to get
Many have switched to King HP series--they work great as well and are less expensive than Clevites
Any of these are available from any parts seller --Good Luck!
Logged
I have always had a fascination with fast cars at the expense of more normal character development

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: SBC bearings
« Reply #3 on: October 10, 2015, 03:40:53 AM »
  GasserX:
 The CB663H was a hard coat bearing with a chamfer on the outer side of the bearing to match the rod.
The same bearing is now CB663HN. Same bearing just narrow or not as wide.
Gives you the same bearing surface but was cheaper for them to make.
The Federal/Mogul or Speed-Pro bearing still have a wide body with a chamfer.
Part number 8-7100CH or 8-7100CHA with a dowel hole for aluminum rods.

Matt
Logged
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/
Pages: [1]   Go Up
« previous next »