Technical > Roo Man's Room

twin engine dragster questions

(1/2) > >>

buickfed:
mine is a 192" and my plan down the road is to build a twin inline fed. pics of the rail are on my posting buickfed. from looking at those pics, do you think i can put 2 in it? also, the coupler for 2 engines, how many different styles are there?
thanks
john

denverflatheader:
When you say inline, is that two straight 8s?  I started a twin engine flathead powered red 2 years ago.  I don't know how many different twin engine couplers styles are out there......  probably alot.  If you like I can take pictures of mine for show and tell.  I'd say there is plenty of length for the two engines in your chassis.  You might pull a string line from the rearend coupler to the proposed front-front engine crank snout location.  If the engines not level in the chassis and sitting at a downward angle, you might have ground clearance concern unless you slightly rotate rear-end.

rooman:
John,
        I just went back and looked again at the pic's of your car and it does not look like you have enough tubing out in front of your current single motor deal to add another motor. The length is not a major problem (especially if you want an exciting ride) but a double should really be engineered for the weight of the second engine being so far out. I will have one going up on my jig soon so I will post photos as it progresses.
 Most of the early doubles used a pair of sprockets and a double row chain to link the motors although there are probably a lot of industrial couplers that would do the job too.

Roo

bud:
Roo is Right you need just a little bit of flex on the hookup I call it forgiveness. I have yet to see 2 motors work intirely as one. A guy I was Buddys with
( Lefty Muterbauch) ran 2 sbc in line and we built a coupler and tried to ridged mount it from the snout of the rear motor and clutch/flywheel of the front motor with a clutch can before there was such a thing. so we talk to chet (Chet Herbert) and change our whole design, This we did back in 1961..

buickfed:
denver,
buick str 8's; i have a lead on a pair. ready for somebody to put them in something. tons of stuff goes with them.  t

roo,
the buick 350's are lighter than the sbc, but longer. there is a guy in danbury ct that runs 2 409's. got to get down there to see it someday.

Navigation

[0] Message Index

[#] Next page