Author Topic: Head and Neck restraints, what are you using?  (Read 7880 times)

Offline Rodchucker

  • Newbie
  • *
  • Posts: 6
    • View Profile
  • Your Best Time: 1/4: 7.67 @175
  • Your Engine: Ford Cleveland 351ci
  • Your Track: Willowbank Raceway
  • Your Vehicle: Spitzer Mobil1 Bantam
Head and Neck restraints, what are you using?
« on: March 11, 2014, 08:09:53 PM »
Hi boy's,
I am looking at buying one but am unsure which one will suit my Spitzer.
I would think what an altered might need would be different to a dragster or door car?
What types are you guy's using and why?
Thanks
Chris

Offline Oldschool

  • Full Member
  • ***
  • Posts: 122
    • View Profile
  • Your Best Time: 8.42 in a BB Chevy Altered 9.28 in my Vega
  • Your Engine: 434 Scott Shafiroff Racing Engine
  • Your Track: US 36 , Mo Kan and Heartland Park Topeka
  • Your Vehicle: 173" Front Engine Dragster
Re: Head and Neck restraints, what are you using?
« Reply #1 on: March 11, 2014, 08:17:08 PM »
No ,difference. As far as neck, if you can afford get one of the neck restraints. I drove an Altered and just had a good neck collar, but not to thick. I wear the same in my door car.
It is not the years in your life
But the life in your years

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 306
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: Head and Neck restraints, what are you using?
« Reply #2 on: March 12, 2014, 03:58:31 AM »
I'm using a Simpson Pro Rage. It is very lightweight and small compared to the other HANS units. It's size makes it easier to get in and out of a dragster.

dreracecar

  • Guest
Re: Head and Neck restraints, what are you using?
« Reply #3 on: March 12, 2014, 08:39:48 AM »
Go to the track with your car and ask other racers if you can borrow theirs to see if works for you. We run a Hans, the other ones we tried either were too big to fit through our narrow cage,one kept getting hung up on the belts adj buckle, driver didnt like the strap-on type. New stuff comes out all the time and its an expensive deal. Dont buy used unless its less than a year old and the company is still in business, these things have to be re-certed now ($100) and if they are too old or out of business-your screwed.

Offline JrFuel Hayden

  • Hero Member
  • *****
  • Posts: 600
    • View Profile
    • Hayden Enterprises Speciality Wheels
  • Your Best Time: 6.02, 236 mph, 1/4 in 1973 Div 3 TF Champ
  • Your Engine: SBC, Alky, 403 ci, Best 6.99 @ 190 & 409 Hemi
  • Your Track: Bakersfield
  • Your Vehicle: 225" FED NHRA Heritage Jr Fuel
Re: Head and Neck restraints, what are you using?
« Reply #4 on: March 12, 2014, 09:44:44 AM »
Hayden Wheels has just started selling a new neck support system. You can see the Leatt system on our web site Haydenent.com.
The Leatt company has been around for a long time making neck supports for motorcycle racers, but now makes a SFI approved system.
One of the features I like is it has a low back piece, our team's 1'st Hahns was high enough it got caught on the roll cage, also the Leatt has seat harness channels. And it weighs 2 lbs.
Anyway, just call me with any questions, 800-624-3803

Jon Hansen, Jr Fuel Dragster Association
Jon C. Hansen

Hayden Wheels

Offline msundstrom

  • Full Member
  • ***
  • Posts: 119
    • View Profile
  • Your Best Time: 7.45 @ 182 in 1/4
  • Your Engine: NA Injected 505 BBC on 45%
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: FED
  • General Location: Washington Coast
Re: Head and Neck restraints, what are you using?
« Reply #5 on: March 12, 2014, 10:01:13 AM »
I use the defNder, fit my car better. $15 to recertify plus shipping.
Mark S

Offline masracingtd1167

  • Hero Member
  • *****
  • Posts: 1110
  • bill masiello Shelton Ct.
    • View Profile
  • Your Best Time: 7.40's at 181 on motor 6.94 at 192 nitrous
  • Your Engine: 394 chevy
  • Your Track: Lebanon Valley Dragway
  • Your Vehicle: 2003 Neil and Parks
Re: Head and Neck restraints, what are you using?
« Reply #6 on: March 12, 2014, 11:25:29 AM »
I use the Simpson pro rage also and I am very happy with it . I feel a lot more secure with it on .

Offline Paul New

  • Hero Member
  • *****
  • Posts: 743
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: Head and Neck restraints, what are you using?
« Reply #7 on: March 12, 2014, 07:15:52 PM »
Jon I see Leatt makes a new model, I have run three different models my first was an R3 it just didn't fit my car to well and it caught the top of the cage when trying to get out, the second was the first 38.1 Leatt that was really comfortable and I felt it was very safe until I tried to get out of my car I was virtually stuck in the car it would have been great in a door car, and my third is a Dfender it is all right I can get in and out of the car all right.

Offline Maryannchats

  • Full Member
  • ***
  • Posts: 196
    • View Profile
    • check over here p40ipw
  • Your Best Time: Etoxorub
  • Your Engine: Ovycubi
  • Your Track: Ybipu
  • Your Vehicle: Ovuhyqe
  • General Location: Esewi
find here o72nrm
« Reply #8 on: July 28, 2024, 01:16:06 PM »