Author Topic: SBC #4000 Comp Cams revkit question  (Read 5677 times)

Offline Flyingdutchmanfc

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
  • Your Best Time: T.B.D.
  • Your Engine: Chevy 383 alky
  • Your Track: Indianapolis
  • Your Vehicle: 23T Altered
SBC #4000 Comp Cams revkit question
« on: March 10, 2013, 03:22:32 PM »
Its my first experience with a rev kit, it came with no instructions what so ever, its a no brainer of how it should go together with the contents of the box. I did watch a youtube install of the kit on a few lifters and that guy was really working to get the springs in with a small compressor. I used only my fingers, some were tight obviously on the high side of the cam. But its the low side of the cam I am in question about. They will not fall out by any means, but they can easily be removed buy pushing the lifter down. Is this normal?

Video

Live everyday like it were your last, someday it will be.

Offline Frontenginedragsters

  • Full Member
  • ***
  • Posts: 202
    • View Profile
    • Pro-Formance Specialties
Re: SBC #4000 Comp Cams revkit question
« Reply #1 on: March 11, 2013, 05:50:10 AM »
Looks like a case of the wrong parts >:(
I know your thinking the same thing.
Try a rev-kit from a different company.
They look like Crane lifters ?
Driving a Front Engine Dragster builds character and keeps you awake for a 1/4 mile at a time.
http://www.pro-formancespecialties.com/

Offline hotrod316

  • Sr. Member
  • ****
  • Posts: 352
    • View Profile
Re: SBC #4000 Comp Cams revkit question
« Reply #2 on: March 11, 2013, 06:11:20 AM »
there is a piece miss?  on both sides!

Offline Flyingdutchmanfc

  • Jr. Member
  • **
  • Posts: 66
    • View Profile
  • Your Best Time: T.B.D.
  • Your Engine: Chevy 383 alky
  • Your Track: Indianapolis
  • Your Vehicle: 23T Altered
Re: SBC #4000 Comp Cams revkit question
« Reply #3 on: March 16, 2013, 05:51:35 PM »
I got with Comp Cams. Their lifters are almost 1/2 inch longer then my Lunatis. Soooo I just decided to run without them, ive never ran them before and can only hope for the best. I am not sure if Lunati makes a set for their lifters or not, but I am out of time and just need to keep assymbling this thing so I can hit the track in 3 weeks. Also my lifters are spring loaded themselves. They are made to do a cam change without removing the intake, carb, etc. Just remove the pushrods and the lifters spring back from the lobes.
« Last Edit: March 16, 2013, 05:53:50 PM by Flyingdutchmanfc »
Live everyday like it were your last, someday it will be.

Offline JoydayVox

  • Full Member
  • ***
  • Posts: 104
    • View Profile
    • dapoxetine in mexico
  • Your Best Time: Urenulo
  • Your Engine: Ekubyboxe
  • Your Track: Ysehekol
  • Your Vehicle: Ijesu
  • General Location: Eweciq
Re: SBC #4000 Comp Cams revkit question
« Reply #4 on: November 09, 2024, 04:29:34 AM »
<a href=https://fastpriligy.top/>priligy alternative</a> Advertisement cookies help to safely prescribe to take the action of the route for the recommended by cod