Author Topic: Leak down tester  (Read 5846 times)

Offline spitzerscott

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • Ogg Motorsports
  • Your Best Time: 5.73@118.80
  • Your Engine: 336 Small Block Chevy
  • Your Track: Osceola IN, Top Eliminator runs 1/8 mile
  • Your Vehicle: Spitzer225 RED, Alcohol SBC
  • General Location: Northern Indiana
Leak down tester
« on: August 02, 2015, 11:57:40 AM »
 Hey, Spud what do you recommend? I bought an el-cheapo and got my money's worth.  Now I need one that works, Do you offer one, or have a recommendation.

Offline BK

  • Sr. Member
  • ****
  • Posts: 310
    • View Profile
  • Your Best Time: 8.45 / 5.30
  • Your Track: Empire Dagway
  • Your Vehicle: Late 70's FED
Re: Leak down tester
« Reply #1 on: August 02, 2015, 06:16:02 PM »
I was given a Moroso leak down set that didn't work right. After taking it apart I found one of the holes I think it was for one of the gauges wasn't drilled all the way. Opened the hole up and it works perfect. Maybe yours just needs a little help. 

Offline GlennLever

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2010
    • View Profile
    • The Lever Family Site
  • Your Best Time: 1/4 mile 7.950 at 165 MPH
  • Your Engine: Pontiac 461 Alky Blown
  • Your Track: Empire Dragway, NY
  • Your Vehicle: Front Engine Dragster
Re: Leak down tester
« Reply #2 on: August 02, 2015, 09:27:20 PM »
Glenn R. Lever
Rochester, New York 14617-2012
My Cars https://www.lever-family-racing.com/

Offline tony1966

  • Newbie
  • *
  • Posts: 34
    • View Profile
  • Your Best Time: 7.62 1/4 mile
  • Your Track: Great Lakes Dragaway
  • Your Vehicle: 2008 FED
Re: Leak down tester
« Reply #3 on: August 03, 2015, 03:55:16 PM »
I have the same one glenn has. I use it often, no complaints.

Tony

Offline coupemerc

  • Sr. Member
  • ****
  • Posts: 306
    • View Profile
  • Your Best Time: 3.86@188 (1/8 Mile), 5.97@233 (1/4 Mile)
Re: Leak down tester
« Reply #4 on: August 03, 2015, 04:42:42 PM »
My favorite is the old single gauge Snap-On tester. I have two of them. It is simple to use and doesn't require you to do any subtraction. You can still find them on Ebay at times. Usually between $80-100

Offline slingshot383

  • Full Member
  • ***
  • Posts: 143
    • View Profile
  • Your Best Time: 1/4 mi. 7.95 @ 168
  • Your Engine: Chrysler, alcohol, 528 cu.in.
  • Your Track: Gateway Motorsports Park (the Swamp)
  • Your Vehicle: Undercover Chassis 23T altered
Re: Leak down tester
« Reply #5 on: August 04, 2015, 04:02:04 AM »
I use a double gauge unit, us it for leak-down, and to set my poppets.
Undercover 23T Altered, big block Mopar
Member of the Torque and Recoil Club

Offline spitzerscott

  • Full Member
  • ***
  • Posts: 116
    • View Profile
    • Ogg Motorsports
  • Your Best Time: 5.73@118.80
  • Your Engine: 336 Small Block Chevy
  • Your Track: Osceola IN, Top Eliminator runs 1/8 mile
  • Your Vehicle: Spitzer225 RED, Alcohol SBC
  • General Location: Northern Indiana
Re: Leak down tester
« Reply #6 on: August 05, 2015, 05:04:03 PM »
I have heard the most good words about the Total Seal unit. I guess I will go with that.   Thanks guys again for your help.       Scott