Author Topic: filter for FI  (Read 3514 times)

Offline wideopen231

  • Hero Member
  • *****
  • Posts: 1911
    • View Profile
  • Your Best Time: 1/8 3.70@ 198 1/4 5.78@245
  • Your Engine: Hemi 526 ci alcohol
  • Your Track: Piedmont
  • Your Vehicle: 225 CMC FED
  • General Location: NORTH CAROLINA
filter for FI
« on: July 21, 2015, 12:27:03 PM »
Looking for best flowing filter for FI system.Have oberg that I have used in past. Never a issue.It's little bigger tan need,which makes getting mounted low enough to insure no air pocket is little more difficult. Thinking between pump and tank best since it protects pump also.
I always filter fuel twice before it goes into tank,but still vents are open and crap can get into system.
Any suggestion on free flow filter.
Relecting obama is like shooting right foot because it did not hurt enough when you shot left foot

Offline Draw 3D

  • Jr. Member
  • **
  • Posts: 71
    • View Profile
  • Your Engine: Blown Alky 406 SBC
  • Your Track: Wild Horse Pass
  • Your Vehicle: 1923 T Roadster
  • General Location: Arizona
Re: filter for FI
« Reply #1 on: July 21, 2015, 08:47:35 PM »
I have a System 1 -16 fuel filter that flows 28 gpm located between my tank and pump and it has worked great for me, here's a link http://www.system1filters.com/fuelfilters.htm, scroll down to the bottom of the page and look at P/N 203-229416.