« previous next »
Pages: [1]   Go Down

Author Topic: How much oil?  (Read 5683 times)

Offline gasserx

  • Full Member
  • ***
  • Posts: 192
    • View Profile
  • Your Best Time: 1/4 - 9.08
  • Your Track: Gardermoen Raceway
  • Your Vehicle: 180" FED
How much oil?
« on: July 03, 2015, 11:30:22 AM »
How much oil do you recomend for a sbc with a Milodon 31145 pan?
Logged

Offline Paul New

  • Hero Member
  • *****
  • Posts: 743
    • View Profile
  • Your Best Time: 6.47 @ 214 MPH SBC
  • Your Engine: 387" SBC
  • Your Track: Woodburn Dragstrip
  • Your Vehicle: 2005 FED
Re: How much oil?
« Reply #1 on: July 03, 2015, 12:00:26 PM »
Milodon states that this pan is 7qts plus the filter. We ran  this pan with 8qts in our blown SBC running 6.60's. I have also run this pan with 6qts in a lower HP application.
I do have one of these oil pans for sale granted it does come with all the parts between the pan and intake.......lol,
Logged

Offline gasserx

  • Full Member
  • ***
  • Posts: 192
    • View Profile
  • Your Best Time: 1/4 - 9.08
  • Your Track: Gardermoen Raceway
  • Your Vehicle: 180" FED
Re: How much oil?
« Reply #2 on: July 03, 2015, 12:12:04 PM »
Quote from: Paul New on July 03, 2015, 12:00:26 PM
Milodon states that this pan is 7qts plus the filter. We ran  this pan with 8qts in our blown SBC running 6.60's. I have also run this pan with 6qts in a lower HP application.
I do have one of these oil pans for sale granted it does come with all the parts between the pan and intake.......lol,

I already have one  ;)
But was not sure how much oil to fill in it. This is not a very high power engine. Injected alky. Not highest cr around. I'll try 6qts + filter then, should be safe?
Logged

Offline dusterdave173

  • Hero Member
  • *****
  • Posts: 638
    • View Profile
  • Your Best Time: 5.38in 1/8th
  • Your Engine: 355 CI SBC
  • Your Track: Mooresville, NC
  • Your Vehicle: CenPen 200 inch FED
Re: How much oil?
« Reply #3 on: July 03, 2015, 02:59:17 PM »
I have used 7 total with good results--When we ran 8 total she would spit a little out one breather at high RPM--either way you will be OK but 7- to 7 1/2 will do just fiine IMO
Logged
I have always had a fascination with fast cars at the expense of more normal character development

Offline George

  • Hero Member
  • *****
  • Posts: 515
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA
Re: How much oil?
« Reply #4 on: July 04, 2015, 08:34:43 AM »
I have run the same pan for several years . 8 quarts total with the spin on filter.
Logged

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: How much oil?
« Reply #5 on: July 04, 2015, 09:06:06 AM »
If you guys could share some wisdom... this is an old question I have:

With drag racing in mind, wouldn't a rear sump oil pan (like Milodon 31167) be preferred over a full length (flat bottom) pan? If seems to me that it would be easier to keep the pickup tube immersed with the rear sump one, with possibly lower oil level.

Thank you,

Logged

Offline George

  • Hero Member
  • *****
  • Posts: 515
    • View Profile
  • Your Vehicle: 1964 Mercury Comet Super Stock/ M automatic
  • General Location: Midwest USA
Re: How much oil?
« Reply #6 on: July 04, 2015, 09:38:23 AM »
« Last Edit: July 04, 2015, 09:40:34 AM by George »
Logged

Offline ricardo1967

  • Hero Member
  • *****
  • Posts: 570
    • View Profile
  • Your Best Time: No full pass yet.
  • Your Engine: Alky SBC 400
  • Your Track: Brown County Dragway (Bean Blossom, IN)
  • Your Vehicle: 173" FED
Re: How much oil?
« Reply #7 on: July 04, 2015, 06:06:59 PM »
Logged
Pages: [1]   Go Up
« previous next »