Technical > Spud Miller's Cave

Hilborn vs. Kinsler

(1/1)

Totally T:
With regards to the flowed pills from both companies, are they the same as in a .110 flowed kinsler is the same as a .110 flowed Hilborn?

fuel749:
Close maybe, but you'd probably have to flow a dozen to get two exactly the same.

dreracecar:
In our world, not enough difference, Its takes me 3 sizes(up or down ) to see any change with my Enderle's. Kinsler has some nice stuff compared to Hilborn, but you pay for it and both work the same

Totally T:
This is on my Kinsler 2 7/16 stack but it gets a little funky as Tim Engler put a bird catcher on it.  It has a Enderle cube BV with the main bypass tee'd at the inlet with a standard Enderle fitting. The have the pill holder in the T but then it was flowed with a jet can with the flowed Kinsler pill instead of using the screw in Enderle.

I'm really thinking that I will just pull the jet can out and screw the pill into the holder like it's meant to be.

slingshot383:
Tim does some neat work!  Great idea, forward facing inlet for a stack injection system.

Navigation

[0] Message Index